440-BA-e-1744
adjustment
weight
In the model series KERN FKB_A, the adjustment weight can be
selected from three pre-
set nominal values (approx.1/3; 2/3; max)
(refer also to
following table, factory setting with grey
background). In order to achieve high-
quality weighing results in
the sense of the measuring technology, it is recommended to
select the nominal value as high as possible.
adjustment weights can be purchased from KERN as option.
In weighing mode keep the PRINT key pressed until [Unit]
appears.
Press the MODE key several times until „CAL“ is displayed.
Acknowledge using SET key, the current setting is displayed.
Select the desired settings by pressing the MODE key.
Use the SET key to confirm selection.
To Next Page
Loading...
Need help?
General
