KERN 440 Series User Manual

440-BA-e-1744
26
Model
Units
440-21N 440-21A 440-33N 440-35N 440-35A 440-43N 440-45N 440-47N 440-49N 440-49A 440-51N 440-53N 440-55N
Gram
x
x
x
x
x
x
x
x
x
x
x
x
x
Pound
x
x
x
x
x
x
x
x
x
x
x
Ounce
x
x
x
x
x
x
x
x
x
x
x
x
x
Troy ounce
x
x
x
x
x
x
x
x
x
x
x
x
x
Tael Hongkong
x
x
x
x
x
x
x
x
x
x
x
x
x
Tael Taiwan
x
x
x
x
x
x
x
x
x
x
x
x
x
Grain
x
x
x
x
x
x
Pennyweight
x
x
x
x
x
x
x
x
x
x
x
x
x
Momme
x
x
x
x
x
x
x
x
x
x
x
x
x
Tola
x
x
x
x
x
x
x
x
x
x
x
x
x
Carat
x
x
x
x
x
Freely selectable factor
x
x
x
x
x
x
x
x
x
x
x
x
x
Dosing and
Zero-tracking
The Auto-Zero function is used to tare small variations in weight
automatically.
In the event that small quantities are removed or added to the
material to be weighed, incorrect weighing results can be
displayed due to the “stability compensation“ in the balance.
(Example: Slowly draining fluids from a container on the balance).
When apportioning involves small variations of weight, it is
advisable to switch off this function.
If Zero-Tracking
however is switched off, the weighing display
becomes more busy.
 In weighing mode keep the PRINT key pressed until [Unit]
appears.
 Press the MODE button several times until „tr“ is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key.
tr on Function activated
tr off Function deactivated
 Use the SET key to confirm selection.

KERN 440 Series Specifications

General

Brand	KERN
Model	440 Series
Category	Scales
Language	English