100
770/GS/GJ-BA-defsi-0023
4 Application Programs
In addition to the functions implemented for weighing, the
KERN 770, GS
and
GJ
balances offer you a variety of application programs.
To select an application program or a specific function, set the appropriate code in the
menu. Part 2 describes in detail how to set menu codes.
Additional settings for running a particular program and displaying the data are
listed in a table of codes. For your convenience, we have indicated all factory-set
codes with an “*“.
One thing you should do when you want to set the code for a different program, or when
someone else has already operated the balance, is:
Select the reset function - code
9--1
o
- to change all menu codes back to the original
factory settings.
4.1 Tare Memory
Tare Memory Code 2 1 6
Symbol displayed when a value is stored:
NET
Press the
F
key to store the tare weight. The balance is now automatically tared, so you
can weigh again starting with a zero readout.
If you have stored a value in the tare memory, a “1“ will be output after the ID code of
this value to identify it as such on the computer screen or on the printout.
To Next Page
Loading...
Need help?
General
