ABS/ABJ-BA-e-1019
10
2.3.2 Operating instructions for the balance
Remove the product from the weighing plate after
weighing it.
Do not force the balance to open.
Do not allow the balance to come into contact with water
or metal shavings.
If the balance is not used for an extended period of time
(7 days), unplug the power supply.
Do not weigh magnetic objects.
Do not exert any pressure on the weighing plate.
2.4 Balance installation
Remove the adhesive sheeting, adhesive strips and foam
material.
2.4.1 Prepare the weighing chamber.
Place the following parts on the balance in sequential
order:
- Protective ring (4)
- Plate holder (3)
- Plate (2)
To Next Page
Loading...
Need help?
General
