KERN EG 620-3NM User Manual

EW/EG-N/EWB-e-1627
46
7 Functions
7.1 Access and changing of numerous functions:
The balance has been set to a certain standard configuration in the factory. This con-
figuration is marked by a ☆.
The configuration can be changed as follows:
Operation Display
1. Access to the functions.
Switch on the balance:
Press the
key for about 4 seconds
until [FUNC] appears:
When released the following will appear :
(po
ssible configurations are listed in
chap. 7.2.2).
2. Changing the functions
Run through the various functions for
con
figuration by continuing to press the
key.
Operate the
key in order to change
the last position in the parameter.
Store the chosen function by operating
the key.
You will now leave the function menu
and return to weighing mode.
ο
0 I I I F
0.000
g
Func
1 b.G. 1
2.SEL 0
2.SEL 1
ο
0 I I I F
0.000
g

KERN EG 620-3NM Specifications

General

Brand	KERN
Model	EG 620-3NM
Category	Scales
Language	English