12 FCF-BA-e-1611
7 Basic Operation
Start-up
Press .
The balance will carry out a self-test As soon as the
weight display appears, the balance is ready for
weighing.
Switching Off
Press again, the display will extinguish
Weighing
Place goods to be weighed on balance.
Wait for standstill control, after the standstill control, the
weighing unit appears right hand in the display
(e.g. g or kg)
Read weighing result.
If the goods are heavier than the weighing range, the display
will show "Error" (=Overload), and a whistle is sounded.
Taring
Place an empty weighing container, the weight of the
weighing container will be displayed.
Press , the zero display appears. The tare weight
is saved until it is deleted.
To Next Page
Loading...
Need help?
General
