In the model series KERN FCF, the adjustment weight can be
selected from three/four pre-
set nominal values (approx. 1/3; 2/3;
max) In order to achieve high-quality weighing results in the sense
of the measuring technology, it is recommended to select the
nominal value as high as possible.
The non delivered adjustment
weights can be purchased from KERN as option.
Keep pressed in the weighing mode until “Unit” is
displayed.
Press repeatedly until „CAL“ will be displayed.
Acknowledge using , the current setting is displayed.
Select desired setting by .
Acknowledge selection by .
To Next Page
Loading...
Need help?
General
