KERN PLJ Series User Manual

ALJ/ALS/PLJ/PLS-BA-e-1741
4
1 Technical Data
KERN ALJ 160-4A ALJ 200-5DA
Weighing range (max) 160 g 82 g / 220 g
Readability (d) 0.1 mg 0.01 mg / 0.1 mg
Reproducibility 0.1 mg 0.04 mg / 0.1 mg
Linearity ± 0.3 mg ± 0.1 mg / 0.2 mg
Stabilization time (typical) 4 sec. 6 sec.
Minimum unit weight at
piece counting
> 0,5 mg
under laboratory conditions
> 0,1 mg
under laboratory conditions
> 5 mg
under normal conditions
> 1 mg
under normal conditions
Warm-up time 8 hours
Adjustment weight internal
Reference quantities at
piece counting
10, 25, 50, 100 freely selectable
Weighing Units
ct, g, gn, lb, mo, oz, ozt,
tl (HK), tl (Singap. Malays), tl (Tw), pen
Electric Supply 24 V AC, 500mA
Operating temperature + 5° C …. + 35° C
Humidity of air max. 80 % (not condensing)
Housing (B x D x H) mm 210 x 340 x 330
Dimensions of windshield
(B x D x H) mm
160 x 140 x 205 (inside)
190 x 195 x 225 (outside)
160 x 170 x 225 (inside)
190 x 195 x 225 (outside)
Weighing plate (stainless
steel)
Ø 80 mm
Weight kg (net) 6.5 kg 7 kg
Interface RS 232C
Pollution Degree
2
Overvoltage Category
Category II
Altitude
Up to 4000 m
Installation Site
device may only be used indoors

KERN PLJ Series Specifications

General

Brand	KERN
Model	PLJ Series
Category	Scales
Language	English