ALJ/ALS/PLJ/PLS-BA-e-1741
The display for weight determination of the "glass sinker in air“ appears.
Confirm by pressing the PRINT button.
Tare if necessary and hook on the glass sinker centrically.
Wait until the weight display of the weighing balance has become stable and
then press the PRINT button. „WEI AIR“ appears flashing.
The display for weight determination of the "glass sinker in sample liquid“
appears.
Acknowledge using PRINT button
Tare if necessary and immerse the sinker into the measuring fluid
Wait until the weight display of the weighing balance has become stable and
then press the PRINT button. „WEI LIQ“ appears flashing.
The density of the sample fluid is shown
Return to weighing mode
Press the ON/OFF key
or use the MENU button to start a new measuring cycle.
If at the density determination errors have appeared, „d-----„ is displayed.
To Next Page
Loading...
Need help?
General
