KERN PLJ Series User Manual

ALJ/ALS/PLJ/PLS-BA-e-1741 7
KERN ALS 160-4A ALS 250-4A
Weighing range (max) 160 g 250 g
Readability (d) 0.1 mg 0.1 mg
Reproducibility 0.1 mg 0.1 mg
Linearity ± 0.3 mg ± 0.3 mg
Stabilization time (typical) 4 sec. 4 sec.
Minimum unit weight at
piece counting
> 0.5 mg > 0.5 mg
Warm-up time 8 hours
Recommended adjustment weight,
not added (class)
150 g (E2) 200 g (E2)
Reference quantities at
piece counting
10, 25, 50, 100 freely selectable
Weighing Units
ct, g, gn, lb, mo, oz, ozt,
tl (HK), tl (Singap. Malays), tl (Tw), pen
Electric Supply 24 V AC, 500 mA
Operating temperature + 5° C …. + 35° C
Humidity of air max. 80 % (not condensing)
Housing (B x D x H) mm 210 x 340 x 330
Dimensions of windshield
(B x D x H) mm
160 x 140 x 205 (inside)
190 x 195 x 225 (outside)
Weighing plate (stainless steel) Ø 80 mm
Weight kg (net) 5.7 kg
Interface RS 232C

KERN PLJ Series Specifications

General

Weighing plate material	stainless steel
Minimum part weight at piece counting	0.1g - 2g (depending on model)
Stabilisation time under laboratory conditions	2 seconds
Permissible ambient temperature	10 °C - 40 °C
Interface	RS-232
Units	g, kg, lb, oz