685
Driving your vehicle
LKA Operation
To activate/deactivate the LKA:
With the ignition switch in the ON
position, LKA turns on automatically.
The indicator ( ) in the cluster
display will initially illuminate white. If
you press the LKA button located on
the instrument panel on the lower
right hand side of the driver, LKA will
be turned off and the indicator on the
cluster display will go off.
(Continued)
• The system detects lane
markers. And controls the
steering wheel by a front view
camera, therefore, if the lane
markers are hard to detect,
the system may not work
properly. Always be cautious
when using the system.
• When the lane markers are
hard to detect, please refer to
“Driver’s attention”.
• Do not remove or damage the
related parts of LKA.
• Do not place objects on the
crash pad that reflects light
such as mirrors, white paper,
etc. it may cause malfunction
of LKA if the sunlight is
reflected.
(Continued)
(Continued)
• You may not hear warning
sound of LKA because of the
excessive audio sound.
• Whilst other beeps such as
the seat belt warning sound
are in operation and override
the LKA alarming system,
LKA beeps may not occur.
• If the vehicle speed is high,
steering torque for assistance
will not be enough to keep
your vehicle within the lane. If
so, the vehicle may move out
of its lane. Obey speed limit
when using LKA.
• If you attach objects to the
steering wheel, the system
may not assist steering.
• If you attach objects to the
steering wheel, hands off
alarm may not work properly.
OST057072R
To Next Page
Loading...
Need help?
General
