568
✽✽
NOTICE
The “COLD” range is for reference
only and should NOT be used to
determine the transaxle fluid level.
✽✽
NOTICE
New automatic transaxle fluid
should be red. The red dye is added
so the assembly plant can identify it
as automatic transaxle fluid and dis-
tinguish it from engine oil or
antifreeze. The red dye, which is not
an indicator of fluid quality, is not
permanent. As the vehicle is driven,
the automatic transaxle fluid will
begin to look darker. The colour
may eventually appear light brown.
Use only the specified automatic
transaxle fluid. (Refer to
"Recommended lubricants or capac-
ities" in chapter 9.)
Changing the automatic
transaxle fluid
Have the automatic transaxle fluid
changed by a professional workshop
according to the maintenance sched-
ule. Kia recommends to visit an
authorised Kia dealer/service part-
ner.
Maintenance
WARNING - Transaxle
fluid
The transaxle fluid level should
be checked when the engine is
at normal operating tempera-
ture. This means that the
engine, radiator, radiator hose
and exhaust system etc., are
very hot. Exercise great care
not to burn yourself during this
procedure.
CAUTION
• Low fluid level causes transaxle
shift slippage. Overfilling can
cause foaming, loss of fluid and
transaxle malfunction.
• The use of a non-specified
fluid could cause transaxle
malfunction and failure.
WARNING - Parking
brake
To avoid sudden movement of the
vehicle, apply the parking brake
and depress the brake pedal
before moving the shift lever.
To Next Page
Loading...
Need help?
General
