668
Maintenance
2. Lift up the wiper blade clip. Then
pull down the blade assembly and
remove it.
3. Install the new blade assembly.
Rear window wiper blade
1. Raise the wiper arm (1) and pull
out the wiper blade assembly.
2. Install the new blade assembly by
inserting the centre part into the
slot in the wiper arm until it clicks
into place.
3. Make sure the blade assembly is
installed firmly by trying to pull it
slightly.
To prevent damage to the wiper arms
or other components, have the wiper
blade replaced by a professional
workshop. Kia recommends to visit
an authorised Kia dealer/service
partner.
OHM078062
OHM078063
OYB046462R
OYB046463R
To Next Page
Loading...
Need help?
General
