MAINTENANCE 6-23
1. To drain the used oil, remove the drain
plug at the bottom of the transmission
case and drain the oil completely into
the oil pan.
2. After draining reinstall the drain plug.
3. Fill with the new DAEDONG TF65 fluid
up to the upper line of the gauge.
(See “LUBRICANTS” in Maintenance
Section)
4. After running the engine for a few
minutes, stop it and check the oil level
again; add oil to prescribed level.
Oil Capacity 44 (11.6 U.S.gals.)
To avoid personal injury:
Allow engine to cool down
sufficiently, oil can be not and can
burn.
CAUTION
615O637A
IMPORTANT
Do not operate the tractor imme-
diately after changing the trans-
mission fluid.
Run the engine at medium speed
for a few minutes to prevent
damage to the transmission.
(1) Gauge (2) Oil Filling Plug
(A) Oil Level is Acceptable Within This Range
CHANGING TRANSMISSION FLUID
615O636A
615O635A
EVERY 300 HOURS
(1) Oil Filter Cartidge
(1) Drain Plug
To Next Page
Loading...
Need help?
General
