MAINTENANCE 6-9
CHECKING HEAD LIGHT, HAZARD
LIGHT ETC.
1. Inspect the lights for broken bulbs and
lenses.
2. Replace if broken.
CHECKING SEAT BELT AND ROPS
1. Always check condition of seat belt
and ROPS attaching hardware before
operating tractor.
2. Replace if damaged.
LUBRICATING GREASE FITTINGS
You should apply a small amount of multi-
purpose grease to the following points
every 50 hours or as needed.
If your tractor is operated in extremely
wet, muddy, or dusty conditions you
should lubricate the fittings more often.
EVERY 50 HOURS
1. The brake and clutch pedals should be
inspected for free travel, and smooth
operation.
2. You should adjust these pedals if an
incorrect measurement is found.
(See “adjusting clutch and brake ped-
als” in the 100 hour maintenance
schedule.)
NOTE
Brake pedals should be equal when
depressed.
CHECKING GAUGES, METER AND EASY
CHECKER
CHECKING BRAKE AND CLUTCH PEDALS
1. Inspect the instrument panel for bro-
ken gauge(s), meter(s) and Easy
Checker lamps.
2. Replace if broken.
To Next Page
Loading...
Need help?
General
