Kioti DK35 User Manual

1-4 DK35/40/450L
615O106A
615O107A
A ROPS should never be modified by
welding, grinding or cutting, as this can
weaken the ROPS structure. If any com-
ponents of the ROPS unit is damaged, it
must be replaced.
If the ROPS unit is removed or loosened
for any reason, the parts should be fit-
ted back to their original positions and all
bolts should be properly torqued.
NOTE
Always use seat belt when the trac-
tor is equipped with a ROPS. Never
use the seat belt when tractor is not
equipped with a ROPS.
(ROPS: Roll-Over Protective Structures)
21.Extra caution should be taken when
driving tractors with narrow tread
widths. For added stability you should
adjust your rear wheel tread width,
see page 8-3.
19.Before starting your tractor you
should disengage the clutch, and
make sure that all shift levers are in
the neutral position.
20.For your safety ROPS with a seat belt
is recommended for most applications.
(1) Max. tread width (2) Rear wheels

Kioti DK35 Specifications

General

Engine Type	Diesel
Engine Power	35 hp
Type	Compact utility tractor
PTO HP	28.5 hp
Drive	4WD
PTO Power	28.5 hp
3-Point Hitch	Category I
Engine	3-cylinder
Hydraulic Remotes	2