This switch can be used to warn
other vehicles when malfunction oc-
curs in the tractor while driving on a
public road. Pressing this switch up
blinks the hazard lamp and returning
it turns off the lamp. The turn signal
lights cannot be operated while this
switch is pressed up to operate the
hazard lamps.
HAZARD LAMP SWITCH
(1) Hazard Lamp Switch
(A) ON (B) OFF
TE1O410A
Use this switch to activate the 4WD
mode. Pressing its upper portion ac-
tivates the 4WD mode. Each mode is
performed as follows.
The 4WD (4 Wheel Driving) is to
increase traction by driving four
wheels. It is hydraulically operated
by a simple switch operation.
To engage the 4WD, press the
switch up. To disengage it, return the
switch.
(1) 4WD Switch
(A) 4WD (B) 2WD
4WD SWITCH
TE1O487A
If the hazard lamps are turned
on for an extended period of
time while the engine is stopp-
ed, the battery can be discha-
rged. Therefore, use them only
in emergency.
The hazard lamp can be oper-
ated without the key inserted.
•
•
CAUTION
To Next Page
Loading...
Need help?
General
