EasyManuals Logo
Home>KitchenAid>Dishwasher>KDHE704DSS0

KitchenAid KDHE704DSS0 Installation Instructions

KitchenAid KDHE704DSS0
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
connectdrainhosetowastetee0rwastedisposer
us!ngOne0fthefollowingOPtions:
option;A;WastedisP0ser,noairgap
, optionB,Nowastedisposer--noairgap
[ OptionC,Wastedisposer,withairgap
optionD'NoWastedisposer#withairgap
IMPORTANT:Thedrainhoseconnectionofthedisposerora
wasteteemustbemadebeforethedraintrapandatleast
20"(50.8cm)abovethefloorwherethedishwasherwillbe
installed.
HelpfulTip:Toreducevibrationofthehose,keepthehoseaway
fromthefloor.
Option A, Waste disposer - no air gap
Helpful Tip: Remove disposer knock-out plug.
1. Using a hammer and screwdriver,
knock plug into disposer.
2. Use needle-nose pliers to remove
plug.
3.
Attach drain hose to disposer inlet
with large drain hose clamp
(provided). Use pliers to squeeze
clamp open and move into position.
Option B, No waste disposer - no air gap
1. Fit rubber end of drain hose to waste
tee and cut if needed.
NOTE: Do not cut ribbed section.
2. Attach rubber end of drain hose to
waste tee with a large drain hose
clamp (provided). Use pliers to
squeeze clamp open and move into
position. If the drain hose was cut,
use a 1V2" to 2" (3.8 to 5 cm) screw-
type clamp (not provided).
Option C, Waste disposer - with air gap
Drain trap
Helpful Tip: Remove disposer knock-out plug.
1. Using a hammer and screwdriver,
knock plug into disposer.
2. Use needle-nose pliers to remove
plug.
3. Connect rubber end of drain hose to
air gap and cut if needed.
NOTE: Do not cut ribbed section.
4.
Attach drain hose to air gap with
large drain hose clamp (provided).
Use pliers to squeeze clamp open
and move into position. If the drain
hose was cut, use a 11/2"to 2" (3.8 to
5 cm) screw-type clamp (not
provided).
5.
Use a rubber hose (not provided)
with screw-type clamps (not
provided) to connect from air gap to
disposer inlet.
10

Other manuals for KitchenAid KDHE704DSS0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KitchenAid KDHE704DSS0 and is the answer not in the manual?

KitchenAid KDHE704DSS0 Specifications

General IconGeneral
Stylebuilt-in dishwashers
Colorstainless-steel
Noise level39 decibels
Control Typeelectronic
Delay Startyes
Child Lockno
Load Sensoryes
Number of Racks3
Cycle Signalno
Water Filteryes
Food Disposerno
Sanitize Settingsno
Current15 amperes
Weight and Dimensions IconWeight and Dimensions
Depth24.75 inches

Related product manuals