KitchenAid KDHE704DSS0 Installation Instructions

INSTALLATION
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
I Disc0aneCt electdcan p0we[ at the fUSe box 0r circui t
J
31 Do you already have utility
---" hookups?
YeS _FolIoW instrUCtions in the Prepare Cabinet
opening_EXist!ng Utilities" section,
No _F011ow instructi0ns in the Prepare- Cabinet
Open!ngmaew util!ties" section,
INSTRUCTIONS
Prepare Cabinet Opening--
Existing Utilities
If the water line and the cable extend to the locations shown,
proceed to the "Install Drain Hose" section. If they do not reach far
enough, follow the instructions in the "Prepare Cabinet Opening--
New Utilities" section.
Prepare Cab net Opening--New Ut Ites
Prepare and route the electrical supply
Power SuPply Cord!
Follow opt!on A instructions
DireCt wirel
_----_. Follow Option B instructions
Option A, Power Supply Cord:
NOTE: A grounded 3 prong outlet is required inside a cabinet next
to the dishwasher cabinet opening.
(Jptibnal location
(3.8
Drill a 11/2"(3.8 cm) hole in cabinet side or rear.
See "Product and Cabinet Opening Dimensions" section.

KitchenAid KDHE704DSS0 Specifications

General

Style	built-in dishwashers
Color	stainless-steel
Noise level	39 decibels
Control Type	electronic
Delay Start	yes
Child Lock	no
Load Sensor	yes
Number of Racks	3
Cycle Signal	no
Water Filter	yes
Food Disposer	no
Sanitize Settings	no
Current	15 amperes

Weight and Dimensions

Depth	24.75 inches