EasyManuals Logo
Home>KitchenAid>Dishwasher>KDHE704DSS0

KitchenAid KDHE704DSS0 Installation Instructions

KitchenAid KDHE704DSS0
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
INSTALLATION
Tools and Parts
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with any
tools listed here.
All Installations
Toolsneeded:
ie;S Flat'blade
I screwdriver _"
5Ae!'and 1/4" _ I ULListed/CSA
nut drivers or _ I ApprovedtWist/0n _
hex sockets _ I Wireconnectorse
10, adjustable wrench _1%" omen'end
that opens t0 _' I wiln'ih _"
11/8 (2,9 cm)_
Torx®_T20® and; if installing custom
front panel& Torx® T15®screwdrivers
*Must be the proper size to connect your household wiring to
16-gauge wiring in dishwasher.
Other useful items you may need:
Parts supplied:
, =-=
Drainh0se Drainhose #10Xl/2, underCounter
Clamps (2) Phillips, mounting
(1 argeand _ head brackets(2)
1 small)screws (2)_
Parts needed:
%" compr x 3A"hose fitting
For part or kit, see local
retailer or CallWhirlpool
FNaurtS:1-800,442-9991. Part
mber W10273460
(4) #10 x 1/2"wood screws (if installing custom front panels)
t®TORX, T15, and T20 are registered trademarks of Acument
Intellectual Properties, LLC.
REQUIREMENTS
Supplied in Kit:
(4) Plastic studs (attached to each other by runners)
(4) Short screws (10-16 hex-head screw)
(4) Long screws (8-18 Torx®head screws)
(1)Template (located inside Use and Care Guide bag assembly)
(1) Instruction sheet (located inside Use and Care Guide bag
assembly)
NOTE: The screws supplied are used for only 3/4"thick wooden
panel. If the wooden panel is less than 3/4"thick, customer must
purchase screws locally.
Other parts you may also need:
I 11/2"_2'' _sture
(3'81_5 cm)I duct tal_e I barrier tape J_
screw:type Number_
277)
NOTES:
Moisture barrier tape is recommended when installing a
dishwasher under a wood countertop.
Parts available for purchase in plumbing supply stores. Check
local codes. Check existing electrical supply. See "Electrical
Requirements" section. It is recommended that electrical
connections be made by a licensed electrical installer.
In addition, for first-time installations
Toolsneeded:
I 7iL
IandIV "hole
Parts needed:
Co ertubin (% see EleCtrical ReqUirements_" .
O.D.suggested) or I ........ ^ ,
fexbebadedr i For Direct Wire'. For Powerbupply
flet iebr'e_rilvd _ ! Fu°reDu'Le_itsWteid/Cord: use UL
........ _'_"' ..... I CSA Approved Listed!CSA
strain relief Approved power
t0fitT_ (2,2cm) supplycord kit
hole marked for use with
dishwasher
Make sure all these parts are included in the literature package.
If parts are not included, call 1-800-422-1230. In Canada, call
1-800-807-6777.

Other manuals for KitchenAid KDHE704DSS0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KitchenAid KDHE704DSS0 and is the answer not in the manual?

KitchenAid KDHE704DSS0 Specifications

General IconGeneral
Stylebuilt-in dishwashers
Colorstainless-steel
Noise level39 decibels
Control Typeelectronic
Delay Startyes
Child Lockno
Load Sensoryes
Number of Racks3
Cycle Signalno
Water Filteryes
Food Disposerno
Sanitize Settingsno
Current15 amperes
Weight and Dimensions IconWeight and Dimensions
Depth24.75 inches

Related product manuals