6
To turn the projector on or o, simply hold the power button on the side for three (3) seconds. Once
powered on, the projector’s main menu will display the remaining battery percentage.
If you have a gallery of photo iles, your projector will automatically begin a slideshow of all photos
on your device when you select Images from the main menu. In slideshow mode, each photo will
automatically display in the order they are stored.
To access the controls during playback, you will irst need to tap the center circle button on top of the
projector to bring up the control menu. Then you may perform the following actions:
1. Pause the slideshow: tap the center circle button. Tap it again to resume.
2. Play next image: tap the > button.
3. Return to previous image: tap the < button.
To view videos from a connected device, navigate to Movies from the main menu, and the projector
will automatically populate a list of compatible video iles.
To access the controls during your video’s playback, you will irst need to tap the center circle button
on top of the projector to bring up the control menu. Then you may perform the following actions:
1. Pause video: tap the center circle button. Tap it again to resume.
2. Fast forward: tap the > button. To increase the fast forward speed, tap the button again. Each
press will increase the speed in this order: 2x, 4x, 8x, 16x.
3. Rewind: tap the < button. To increase the rewind speed, tap the button again. Each press will
increase the speed in this order: 2x, 4x, 8x, 16x.
4. Exit video playback: Tap the button to return to the list of video iles available for playback. Tap
the button a second time to exit out to the main menu completely.
9. POWERING THE PROJECTOR ON/OFF
10. CONTROLLING PHOTO PLAYBACK
11. CONTROLLING VIDEO PLAYBACK
To Next Page
Loading...
Need help?
General
