TP-5592 7/96 Specifications 1-13
Service Views
1. Controller
2. Air intake silencer
3. Fuel solenoid
4. Lifting eye
5. Lifting eye
6. Fuel injectors
7. Oil fill
8. Water temperature sender (optional)
9. Fuel filter
10. Fuel return connector
11. Fuel injection pump
12. Oil fill
13. Governor
14. Seawater pump (drain point) (water inlet)
15. Oil pressure sender (optional)
16. Lube oil filter
17. Oil drain valve and hose
18. Oil check
19. Fuel feed pump (fuel inlet)
20. Low oil pressure safety shutdown switch
21. Coolant (freshwater) drain
22. High water temperature safety shutdown switch
23. Overflow tube
24. Pressure cap
25. Heat exchanger
26. Coolant (freshwater) drain
27. Seawater drain
28. High exhaust temperature safety shutdown switch
29. AC load lead connector
30. Nameplate
31. Remote start connector
32. Mixing elbow (water outlet/exhaust outlet)
33. Starter solenoid
34. Battery positive (+) connection
35. Starter motor
36. Ground lug (equipment ground)
37. Battery negative (--) connection
38. Seawater (drain point) petcock
39. Belt guard
40. Coolant (freshwater) drain
41. Battery charging alternator
42. V-belts
43. Engine-driven water pump
Not Shown
Air Intake Heater (Optional Preheat Kit required to make air
intake heater functional).
To Next Page
Loading...
Need help?
General