TP-5592 7/96 Installation 6-1
Section 6. Installation
Introduction
Use this section as a guide when installing the marine
generator set, then refer to the operation section for
specific service instructions. Reliable and safe
generator set operation depends largely upon correct
installation. Remember that the generator set will
probably be the craft’s sole source of electrical power.
Marine generator set installations must comply with all
applicable regulations and standards. See Reference
Material section of this manual for governing agencies.
Follow information presented here in planning and
making installations. Use specifications given only in
initial planning. Use current dimension drawings and
wiring diagrams.
NOTE
Thereisawoodblocklocatedundersomegeneratorset
end brackets to prevent damage during shipment. For
the same reason, there are metal brackets attaching
some generator sets to their wood shipping bases.
Remove the wood block and the metal brackets prior to
installation to provide adequate vibration clearance
during generator set operation. Remove all packing
material, literature, and loose accessories from
generator set prior to operation.
To Next Page
Loading...
Need help?
General