.
SAFETY
PRECAUTIONS FOR MAINTENANCE
TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING
To prevent personal injury, do not carry out maintenance with the engine running. If maintenance must be carried
out with the engine running, carry out the operation with at least two workers and do as follows.
One worker must always sit in the operator's seat and be ready
to stop the engine at any time. All workers must maintain
contact with the other workers.
When carrying out operations near the fan, fan belt, or other
rotating parts, there is a hazard of being caught in the parts, so
be careful not to come close.
Never drop or insert tools or other objects into the fan, fan belt,
or other rotating parts. There is danger that they may contact
the rotating parts and break or be sent flying.
Set work equipment lock lever (1) and parking brake lever (2) to
the LOCK position (L) to prevent the work equipment from
moving.
Do not touch any control levers. If any control lever must be
operated, give a signal to the other workers to warn them to
move to a safe place.
INSTALLING, REMOVING, OR STORING ATTACHMENTS
Appoint a leader before starting removal or installation
operations for attachments.
Place attachments that have been removed from the machine in
a stable condition so that they do not fall. And take steps to
prevent unauthorized persons from entering the storage area.
PRECAUTIONS WHEN WORKING AT HIGH PLACES
When working at high places, use a step ladder or other stand to ensure that the work can be carried out safely.
2 - 31
To Next Page
Loading...
Need help?
General
