.
OPERATION
MACHINE OPERATIONS AND CONTROLS
PROHIBITED OPERATIONS
WARNING
If it is necessary to operate the work equipment control lever when the machine is traveling, stop the machine, then operate
the control lever.
If any lever is operated when the auto-deceleration is being actuated, the engine speed will suddenly increase, so be careful
when operating.
Operations Using Swing Force
Do not use the swing force to compact soil or break objects. This
is not only dangerous, but will also drastically reduce the life of the
machine.
Operations Using Travel Force
Do not dig the bucket into the ground and use the travel force to
carry out excavation. This will damage the machine or work
equipment.
Prohibited to Extend Hydraulic Cylinder to End of Stroke
If the work equipment is used with the cylinder rod operated to its
stroke end, and given impact by some external force, the hydraulic
cylinders will be damaged, causing personal injury. Avoid
operations with the hydraulic cylinder fully retracted or fully
extended.
3 - 157
To Next Page
Loading...
Need help?
General
