.
MAINTENANCE
MAINTENANCE PROCEDURE
REPLACE HYDRAULIC TANK ADDITIONAL BREATHER ELEMENT
WARNING
The parts and oil are at high temperature immediately after the engine is stopped, and may cause burns. Wait for the
temperature to go down before starting the work.
When removing the oil filler cap, turn it slowly to release the internal pressure, then remove it.
1.
Remove nut (2) of breather assembly (1) at the top of the
hydraulic tank, then remove cover (3).
2.
Replace filter element (4) with a new element.
3.
Install cover (3) and nut (2).
4 - 65
To Next Page
Loading...
Need help?
General
