.
MAINTENANCE
MAINTENANCE SCHEDULE
EVERY 1000 HOURS MAINTENANCE
REPLACE FUEL MAIN FILTER CARTRIDGE 4- 66
REPLACE HYDRAULIC OIL FILTER ELEMENT 4- 68
CHANGE OIL IN SWING MACHINERY CASE 4- 69
CHECK OIL LEVEL IN DAMPER CASE, ADD OIL 4- 70
CHECK ALL TIGHTENING POINTS OF ENGINE EXHAUST PIPE CLAMPS 4- 70
CHECK FAN BELT AND ALTERNATOR DRIVE BELT TENSION, REPLACE 4- 70
CHECK NITROGEN GAS CHARGE PRESSURE IN ACCUMULATOR (FOR BREAKER) 4- 70
EVERY 2000 HOURS MAINTENANCE
CHANGE OIL IN FINAL DRIVE CASE 4- 71
CLEAN HYDRAULIC TANK STRAINER 4- 72
CHECKING CHARGE PRESSURE OF NITROGEN GAS IN ACCUMULATOR (FOR CONTROL
CIRCUIT) 4- 73
CHECK ALTERNATOR 4- 77
CHECK ENGINE VALVE CLEARANCE, ADJUST 4- 77
CHECK VIBRATION DAMPER 4- 77
EVERY 4000 HOURS MAINTENANCE
CHECK WATER PUMP 4- 78
CHECK STARTING MOTOR 4- 78
REPLACE ACCUMULATOR (FOR CONTROL CIRCUIT) 4- 79
CHECK FOR LOOSENESS OF HIGH-PRESSURE PIPING CLAMP, HARDENING OF RUBBER 4- 80
CHECK FOR MISSING FUEL SPRAY PREVENTION CAP, HARDENING OF RUBBER 4- 80
EVERY 5000 HOURS MAINTENANCE
CHANGE OIL IN HYDRAULIC TANK 4- 81
EVERY 8000 HOURS MAINTENANCE
REPLACE HIGH-PRESSURE PIPING CLAMP 4- 83
REPLACE FUEL SPRAY PREVENTION CAP 4- 83
4 - 16
To Next Page
Loading...
Need help?
General
