OPERATIONS AND CHECKS BEFORE STARTING ENGINE OPERATION
156 PW160-7H VEAM390100
OPERATIONS AND CHECKS BEFORE STARTING ENGINE
WARNING
● If the control lever is touched by accident, the work
equipment or the machine may move suddenly.
● When leaving the operator’s compartment, always raise
the safety lock lever to the LOCK position.
1. Check that safety lock lever (23) is in the LOCK position.
EMARK
In certain conditions it may be possible for the safety lock
lever to contact the left hand arm rest on the operator seat.
to avoid this, always ensure that the left hand arm rest is stowed
in the fully up position before operating the safety lock lever.
2. Select neutral on the right control lever.
3. Insert the key in starting switch (8), turn the key to the ON
position, then carry out the following checks.
LOCK
UNLOCK
23
Forward
Neutral
Reverse
RH
lever
control
Off
On
Start
8
To Next Page
Loading...
Need help?
General
