SAFETY PRECAUTIONS FOR MAINTENANCE
PW160-7H VEAM390100 45
WARNING: Failure to follow these safety precautions may lead to a serious accident.
DURING MAINTENANCE
PERSONNEL
● Only authorised personnel can service and repair the
machine. Extra precaution should be used when grinding,
welding, and using a sledge-hammer.
ATTACHMENTS
● Place attachments that have been removed from the machine
in a safe place so that they do not fall. If they fall on you or
others, serious injury could result.
WORK UNDER THE MACHINE
● Always lower all movable work equipment to the ground or to
their lowest position before performing service or repairs
under the machine.
● Always chock the wheels of the machine securely.
● Never work under the machine if the machine is poorly sup-
ported.
KEEP THE MACHINE CLEAN
● Spilt oil or grease, or scattered tools or broken pieces are
dangerous because they may cause you to slip or trip.
Always keep your machine clean and tidy.
● If water gets into the electrical system, there is danger that
the machine may not move or may move unexpectedly.
Do not use water or steam to clean the sensors, connectors,
or the inside of the operator’s compartment.
PRECAUTIONS WITH BATTERY
● When repairing the electrical system or when carrying out
electrical welding, remove the negative (-) terminal of the bat-
tery to stop the flow of current.
To Next Page
Loading...
Need help?
General
