GENERAL PRECAUTIONS SAFETY
26 PW160-7H VEAM390100
WARNING: For reasons of safety, always follow these safety precautions.
● Never make any hole in the accumulator or expose it to flame
or fire.
● Do not weld anything to the accumulator.
● When carrying out disassembly or maintenance of the accu-
mulator, or when disposing of the accumulator, it is necessary
to release the gas from the accumulator. A special bleed
valve is necessary for this operation, so please contact your
Komatsu distributor.
Gas in accumulator, see "HANDLING ACCUMULATORS
(144)"
EMERGENCY EXIT
● When exit by normal means is prevented in an emergency
you can get out through the emergency exit (rear window).
● Pull the ring at the bottom of the window and remove strip.
This will allow you to push out glass.
ROTATING BEACON (Option)
● When the machine is operated on or beside a road, a rotating
beacon is required to avoid a traffic accident.
● Contact your Komatsu distributor to install beacon lamp.
ELECTROMAGNETIC INTERFERENCE
When this machine is operating close to a source of high electro-
magnetic interference, such as a radar station, some abnormal
phenomena may be observed.
● The display on the monitor panel may behave erratically.
● The warning buzzer may sound.
These effects do not signify a malfunction and the machine will
return to normal as soon as the source of interference is removed.
To Next Page
Loading...
Need help?
General
