To Next Page

To Previous Page

5-32

5.2 Image Quality Adjustment

D Specify each item as follows:

- [Use Color Density Control] ... [ON]

- [Periodical Adj. Execution] ... [ON]

- [Adjustment Execution Timing] ... [Before Job

Start]

- [Chart Tray Setting] ... [OFF]

E Press [Next].

F Specify each item as follows:

[Switch Color (1st or 2nd)] ... [Precise]

NOTICE

Select [Precise] or [Normal] depending on the situation.

To ensure quality, [Precise] is appropriate. For details,

refer to the HTML User's Guide.

G Press [OK].

Notations and Symbols Used in this Manual2
Exclusion of Liability3
Impermissible Operating Conditions3
Intended Use3
Target Groups3
Configuration and Usage of this Guide4
Display Resolution5
How to Display the Top Page of the HTML User's Guide5
HTML User's Guide Operating Environment5
In a Macintosh Environment5
In a Windows Environment5
Supported Operating Systems/Browsers5
Conventions Used in this Guide6
- Table of Contents7
- Checking the Mounted Optional Devices7
- Make a Note about this Machine Information7
- Checking Network Information8
- Contents10
- Before Getting Started13
- Power Supply13
- Turning the Power on13
- Turning the Power ON/OFF13
- Turning the Power off14
- Power-Saving Function15
- Available Operations in this Machine17
- Copy Functions17
- Major Functions of this Machine17
- Print Functions17
- Device Control Function (Pagescope Web Connection)18
- Hold Function of Print Jobs Using the HDD18
- Scan Functions18
- Application Functions19
- Color Management Function (Color Centro)19
- Job Management Function (Job Centro)19
- Other Applications19
- Let's Make Prints20
- Printing Flow20
- Step 1: Prepare the Printer Driver and Applications20
- Step 2: Load Paper into a Tray20
- Step 3: Configure Information of the Paper Loaded into a Tray in this Machine21
- Step 4: Use the Printer Driver to Print Data21
- Step 5: Check the Finishing22
- Characteristics of Printer Driver23
- In a Macintosh Environment23
- In a Windows Environment23
- Installing Software23
- Installing the Printer Driver23
- Operating Environment23
- In a Windows Environment24
- Installation24
- Default Setting26
- In a Macintosh Environment27
- Installation27
- Default Setting30
- Color Centro31
- Installing Applications31
- Job Centro31
- Operating Environment31
- Color Centro Setup32
- Function Overview32
- Installation33
- Start34
- Function Overview35
- Job Centro Setup35
- Installation36
- Start37
- Basic Operations38
- Loading Paper38
- Loading Paper into the Main Body Tray38
- Loading Paper into the Paper Feeder Unit PF-602M40
- Loading Paper in Post Inserter of Folding Unit FD-50341
- Paper Setting42
- Specifying Paper Information for a Tray42
- Printer Driver Functions47
- Printer Driver Setting47
- [Color Mode]: Select an Output Color47
- [Color Mode]: 2-Color Printing48
- [Management]: Color Configuration49
- [Management]: Manual Setting of a Color Conversion50
- Adjustment Flow51
- Both Sides Adjustment51
- Maintaining the Finishing Quality51
- Making the both Sides Adjustment for each Tray52
- Scan Measurement Adjustment52
- Gap Adjustment60
- Chart Adjustment65
- Zoom and Image Shift Adjustment72
- Image Quality Adjustment75
- To Manage the Daily Image Quality75
- To Specify the Reference Image Quality75
- Daily Image Quality Management (Calibration)76
- Calibration Timing77
- Maximum Density Auto Adjustment (RU)79
- Auto Setting of Color Density Control81
- Color Density Control81
- Manual Setting of Color Density Manual Control84
- Executing Calibration Using the Image Controller86
- Specifying the Reference Image Quality93
- Adjusting the Finisher and Saddle Stitcher94
- Opening the Screen to be Adjusted94
- Adjustable Settings95
- Replacing a Toner Bottle97
- Replenish and Replace Consumables97
- Troubleshooting97
- Replacing a Staple Cartridge99
- Replacing a Waste Toner Box101
- Clearing Paper Jams103
- How to View the Animation Guide103
- [JAM Position] Screen103
- Illustration Screen for Jam Handling104
- If the Specified Paper Is Not Found106
- Replacing with the Specified Paper106
- Forcibly Printing Using the Loaded Paper108
- HDD Space Insufficiency109
- If an Error Has Been Displayed During Scanning109
- Hue Adjustment110
- When Calibration Is Executed for Daily Management110
- When Calibration Is Not Executed110
- Image Position Adjustment111
- Appendix112
- Confirm the Setting Required for the Target Finishing in an Operation Example112
- Good Use of the HTML User's Guide112
- Let's Master the Search Function112
- External Components113
- Name of each Component113
- Internal Components115
- Control Panel Layout117
- Convenient Use of Scan Function (Scan to SMB)119
- In a Windows Environment119
- Step 1: Prepare the Destination Computer119
- In a Macintosh Environment120
- Step 2: Connect this Machine to the Network121
- Step 3: Prepare the Operating Environment for SMB Transmission121
- Step 4: Configure Settings According to Your Environment121
- Step 5: Send Scan Data to a Public Folder121
- Machine122
- Major Specifications122
- Feeding-Related Optional Devices123
- Paper Feeder Unit PF-602M123
Paper Feeder Unit PF-707124
Large Capacity Unit LU-202125
Multi Bypass Tray MB-506126
- Post Inserter (Folding Unit FD-503)127
- Post Inserter PI-502128
- Output-Related Optional Devices129
Relay Unit RU-516130
Large Capacity Stacker LS-505132
Large Capacity Stacker LS-506133
Saddle Stitcher SD-506134
Perfect Binder PB-503135
Finisher FS-531136
Finisher FS-532138
Finisher FS-612141
Multi Puncher GP-501144
Auto Ring Binder GP-502145
Banner Tray Unit MK-740146
- Electronic Optional Devices147
- Authentication Unit AU-201S147
- Original-Related Optional Devices148
- Weight for each Size and Copying Speed149
- Weight for each Size149
- Copying Speed149
- Maximum Paper Size and Printing Area152

Brand	Konica Minolta
Model	bizhub press c1070p
Category	All in One Printer
Language	English

Konica Minolta bizhub press c1070p User Manual

Table of Contents

Questions and Answers:

Konica Minolta bizhub press c1070p Specifications

Related product manuals