3 Overview
The SL-10 is a highly versatile controller that acts as an all-in-one control
processor for control of A/V equipment—especially projectors and
associated equipment—in any room (such as classrooms, boardrooms, or
auditoriums). It streamlines operations and simplifies control by integrating
audio, video, and computer-video sources into a centralized system.
The SL-10 Master Room Controller features:
• An Ethernet port for controlling several AV products over ETH
• 2 general purpose I/O ports that can be configured as analog inputs,
digital inputs, or digital outputs for interfacing with a variety of
devices such as sensors, switches, LEDs, and relays
• 2 bidirectional RS-232 ports that control AV equipment such as
projectors, LCD and PDP displays, power amplifiers, switchers and
scalers
• 5 relay contact closure ports that control other room items related to
the AV system such as raising and lowering drapes, the screen or the
projector
• IR control on two inputs (one built-in receiver and the other on a
3.5mm mini jack) and three outputs (on terminal blocks)
• IR Learning that learns commands from any IR remote
• 1 RS-485 serial port
• Compatibility with Kramer Site-CTRL software for network remote
control and management over the Ethernet port
• A K-NET™ control channel that connects compatible user interfaces
and supplies power and control data over a single cable
• A USB port for uploading a configuration file
• Status LEDs for all functions
• Flexible control via Ethernet, K-NET™, RS-485, an IR sensor and
external IR commands
To Next Page
Loading...
Need help?
General
