3 Overview
The high quality VM-114H2C 2 Input 1:4 HDMI DA/2x CAT5 Outputs is a
switcher/distribution amplifier for HDMI and TP (Twisted Pair) signals. It reclocks
and equalizes one of two selectable input signals and distributes it to two HDMI
and two TP outputs.
In particular, the VM-114H2C:
• Supports up to 2.25Gbps bandwidth per graphic channel (HDMI), 1.65Gbps
bandwidth per graphic channel (DGKat)
1
• Can read and store in non-volatile memory the default EDID, or the EDID
2
block from one or a mix
3
• Features I-EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent
EDID handling & processing algorithm ensures Plug and Play operation for
HDMI systems
of the output display devices, so it can then
provide the EDID information to the source even if the display device is not
connected
• Supports HDMI (V1.4 w 3D, Deep Color
4
• Is HDCP compliant
, x.v.Color™ and 7.1
uncompressed audio channels (Dolby TrueHD, DTS-HD))
• Features LEDs indicating the selected input and active output
• Supports IR remote control and has a remote IR 3.5mm mini jack
• Is 12V DC fed and is housed in a Kramer desktop enclosure
1 Suitable for resolutions up to UXGA at 60Hz, and for all HD resolutions
2 EDID is Extended Display Identification Data (see Section
3.4 for a more detailed definition)
3 The EDID acquired is a weighted average of all the connected outputs. For example, if several displays with different resolutions are
connected to the outputs, the acquired EDID supports all the resolutions, as well as other parameters included in the EDID
4 On the HDMI input
To Next Page
Loading...
Need help?
General
