5
1 Insert a screwdri ver into the small hole and carefully rotate it, trimming the appropriate output level
#
Feature Function
1 INPUT Detachable Terminal Block Connector Connects to the balanced audio source
2 OUT Detachable Terminal Block Connector Connects to the balanced audio acceptor (from 1to 3)
3 12VOC
+
12V DC connector for powering the unit
4 LEFT LEVEL Trimmer
Adjusts
1
the left output signal level
5
RIGHT LEVEL Trimmer Adjusts
1
the right output signal level
6 ONLED Illuminates when receiving power
Figure
1:
VM-3ANAudio DA
Table
1:
VM-3ANAudio DA Features
VM-3AN
1:3AudioDA
LEVEL ON
L!,
R~HT
0
IOIAMER '1'001.$
Figure 1 and Table 1 define the VM-3AN:
4.1 Your VM-3AN Audio DA
Your Distribution Amplifier