Kramer VS-8UFX User Manual

Kramer Electronics Ltd.
ASPEN-32UFX, ASPEN-1616UX, VS-8UFX – Configuring ASPEN-32UFX, ASPEN-1616UX, VS-8UFX
10
Configuring ASPEN-32UFX,
ASPEN-1616UX, VS-8UFX
ASPEN-32UFX, ASPEN-1616UX, VS-8UFX enable you to configure settings in the following
ways:
• Via Ethernet using built-in, user-friendly web pages (see Configuring – Web
Pages on page 10).
• Protocol 3000 commands (see Protocol 3000 Commands on page 34).
In addition, VS 8UFX can be operated from its front panel buttons (see Configuring – Front
Panel on page 20).
Configuring – Web Pages
The embedded web pages enable you to configure ASPEN-32UFX, ASPEN-1616UX,
VS-8UFX via Ethernet.
For illustrative purposes, the screenshots below show the web pages of only one of the 3
devices – the web pages of your device may differ in the number and type of ports it shows
and in some of the features. Unless otherwise noted, the instructions apply to all devices.
ASPEN-32UFX, ASPEN-1616UX, VS-8UFX web pages enable performing the following:
• Defining Interchangeable Ports on page 12.
• Saving Configuration – Web Page on page 14.
• Configuring Genlock Settings on page 16.
• Configuring Network Settings on page 16.
• Changing the TCP Port on page 17.
• Changing the Unit Name on page 17.
• Enabling/Disabling Web Page Password Security on page 18.
• Changing Web Pages Password on page 18.
• Upgrading the Firmware on page 19.
To browse ASPEN-32UFX, ASPEN-1616UX, VS-8UFX web pages:
1. Type the IP address of the device in the address bar of your internet browser (default =
192.168.1.39).

Kramer VS-8UFX Specifications

General

Brand	Kramer
Model	VS-8UFX
Category	Network Router
Language	English