Use and maintenance / SERIE EA 82xx
KRUPS Espresseria Automatic Premium
20
4 Use
The coffee outlet
The steam nozzle
Respecting the instructions below will
ensure good results. Several tests will
probably be required to find the mix and
roasting of the coffee beans to your
taste.
The quality of the water used is also a
factor in the taste of your coffee. Ensure
that the water is fresh from the tap, that it
is cold and that it does not smell of
chlorine.
Do not use stagnant water.
Caution : Your appliance is only des-
igned to use coffee beans. When prepa-
ring your first coffee, after several days
without using the machine or after car-
rying out maintenance, a little steam or
hot water will come out of the steam noz-
zle. Keep at a safe distance from the
steam nozzle and place a cup underneath
the outlets to avoid any risk of burns or
splashes with the steam or hot water. The
main commands are described below :
The height of the coffee outlet is
adjustable. Raise it to fit or remove taller
cups more easily.
The steam nozzle can be moved to the
left or right and tilted forward slightly,
which allows the cup underneath to be
removed more easily.
The drip tray
This tray collects the water used by the
appliance or spilled during preparation.
The machine warns against this by means
of a mechanical float system (22) when
the tray needs to be emptied.
4.1 Switching on the appliance
Press the ON/OFF button (1).
A welcome message is displayed on the
screen, then another warning that the ap-
pliance is preheating.
Next a question will appear on the screen
asking if the appliance needs to be rinsed
or not.
Note : If the machine has not been used
for several days, it must be rinsed.
!
To Next Page
Loading...
Need help?
General
