Use and maintenance / SERIE EA 82xx
KRUPS Espresseria Automatic Premium
24
4.5 Using the auto-cappuccino accessory (optional)
The XS 6000 auto-cappuccino
accessory facilitates the preparation of a
cappuccino or caffe latte (white coffee)
with your Automatic Espresseria
Premium. The accessory includes a
brushed stainless steel milk jug, a riser
tube and a connector tube, and a special
nozzle.
Insert the stainless steel tube into the
rubber seal of the milk jug. It should reach
down almost to the bottom of the jug.
Set the special nozzle as follows for each
drink :
Turn the central section 180° so that the
drink symbol chosen is at the front.
Fit the special nozzle :
A) remove the steam nozzle (21) and
B) replace it with the special nozzle.
Fill the milk jug with cold milk (6 – 10°C).
Connect the special nozzle and the stain-
less steel tube using the connector tube.
Note: the tube must not be twisted to
ensure that the selector button is in the
correct position.
Assembly and fitting of the auto-cappuccino accessory
Cappuccino Caffe Latte
To Next Page
Loading...
Need help?
General
