7 SPEEDOMETER 22
400321-01
– Repeatedly press the button briefly until LAP appears at the bottom right of the
display.
– Briefly press the button .
LAP 1 appears on the left side of the display.
– The laps 1–10 can be viewed with the button .
– Press and hold the button for 3-5 seconds.
The lap times are deleted.
– Briefly press the button .
Next display mode
Info
When an impulse is received from the wheel speed sensor, the left side of
the display changes back to the SPEED mode.
7.7 Display mode SPEED (speed)
400317-02
– Repeatedly press the button briefly until SPEED appears on the left side of the
display.
The current speed is displayed in the SPEED display mode.
The current speed can be displayed in Km/h or Mph.
Info
Making the setting according to the country.
When an impulse comes from the front wheel, the left side of the speedometer
display changes to the SPEED mode and the current speed is shown.
7.8 Display mode SPEED/H (service hours)
400316-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until H appears at the bottom right of the
display.
In display mode H, the service hours of the engine are displayed.
The service hour counter stores the total traveling time.
Info
The service hour counter is necessary for ensuring that service work is carried
out at the right intervals.
If the speedometer is in H display mode at the start of the journey, it automati-
cally changes to the ODO display mode.
The H display mode is suppressed during the journey.
Press the button
for 2–3 seconds.
The display changes to the Setup menu of the speedometer
functions.
Briefly press the
button .
Next display mode
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
No function
To Next Page
Loading...
Need help?
General
