7 SPEEDOMETER 24
7.11 Display mode SPEED/CLK (time)
400319-01
– Repeatedly press the button briefly until CLK appears at the bottom right of the
display.
The time is shown in display mode CLK.
Press the button
for 2–3 seconds.
The display changes to the Setup menu of the clock.
Briefly press the
button .
Next display mode
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
No function
7.12 Setting the clock
400319-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until CLK appears at the bottom right of the
display.
– Press the button for 2–3 seconds.
Press the button
for 2–3 seconds.
Increases the value
Briefly press the
button .
Increases the value
Press the button
for 2–3 seconds.
Reduces the value
Briefly press the
button .
Reduces the value
Wait 3–5 seconds Changes to the next value
Wait 10–12 sec-
onds
Closes the SETUP menu
7.13 Display mode SPEED/LAP (lap time)
400320-01
– Repeatedly press the button briefly until LAP appears at the bottom right of the
display.
In the LAP display mode, up to 10 lap times can be timed with the stop watch.
Info
If the lap time continues running after the button is pressed, 9 memory loca-
tions are occupied.
Lap 10 must be timed using the button .
Press the button
for 2–3 seconds.
The stop watch and the lap time are reset.
Briefly press the
button .
Next display mode
Press the button
for 2–3 seconds.
Stops the clock.
Briefly press the
button .
Starts the stop watch or stop the current lap time measure-
ment, stores it and the stop watch starts the next lap.
To Next Page
Loading...
Need help?
General
