EasyManuals Logo

KTM 125 SX 2004 User Manual

KTM 125 SX 2004
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
ENGLISH
44
Check transmission oil level (125/200)
In order to check the transmission oil level the control screw 1 on the clutch
cover is to be removed. Oil should just barely escape from the inspection
opening when the motorcycle is in an upright position. If necessary, remove
the plug
2 and top up with oil (see technical data engine).
!
CAUTION
!
TRANSMISSION AND CLUTCH WILL BE SUBJECTED TO EXCESSIVE WEAR AND TEAR IF YOU USE
TOO LITTLE OR LOW GRADE OIL
. USE ONLY HIGH-GRADE OIL.
Changing the transmission oil (125/200) *
To change the gear oil warm up the engine and park the motorcycle on a
horizontal surface. Remove oil drain plugs
3 and 4 and drain the used oil
into an appropriate container. Clean the magnets of the oil drain plugs and
mount them together with the appropriate gaskets. Fill in 0.7 l oil (see tech-
nical data- engine), mount the plug
2 and check the engine for leaks.
!
CAUTION
!
TRANSMISSION AND CLUTCH WILL BE SUBJECTED TO EXCESSIVE WEAR AND TEAR IF YOU USE
TOO LITTLE OR LOW GRADE OIL
. USE ONLY HIGH-GRADE OIL.
Check transmission oil level (250/300)
In order to check the transmission oil level the control screw 5 on the clutch
cover is to be removed. Oil should just barely escape from the inspection
opening when the motorcycle is in an upright position. If necessary, remove
the plug
6 and top up with oil (see technical data- engine).
!
CAUTION
!
TRANSMISSION AND CLUTCH WILL BE SUBJECTED TO EXCESSIVE WEAR AND TEAR IF YOU USE
TOO LITTLE OR LOW GRADE OIL
. USE ONLY HIGH-GRADE OIL.
Changing the transmission oil (250/300) *
To change the transmission oil run the engine warm and set up the motorcy-
cle on a horizontal surface. Remove the oil drain screw
7 and drain used oil
into a container. Clean the magnet of the oil drain screw and reinstall oil
drain screw with seal. Pour in 0.7 litres engine oil (see technical data engine),
replace plug
6 and check engine for leaks.
!
CAUTION
!
T
RANSMISSION AND CLUTCH WILL BE SUBJECT TO EXCESSIVE WEAR AND TEAR, IF YOU USE
TOO LITTLE OR LOW GRADE OIL
. USE ONLY HIGH-GRADE OIL.
1
2
3
4
5
6
7

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 125 SX 2004 and is the answer not in the manual?

KTM 125 SX 2004 Specifications

General IconGeneral
Engine TypeSingle-cylinder, 2-stroke
Displacement124.8 cc
Cooling SystemLiquid-cooled
StarterKickstarter
Transmission6-speed
Front SuspensionWP USD 48 mm
Rear SuspensionWP PDS shock absorber
Front BrakeSingle 260 mm disc
Rear BrakeSingle 220 mm disc
Front Tire80/100-21
Rear Tire100/90-19
Seat Height925 mm
Ground Clearance385 mm
Dry Weight88 kg
Bore x Stroke54 mm x 54.5 mm
IgnitionKokusan digital
Wheelbase1, 471 mm
Fuel Capacity7.5 liters
Fuel SystemCarburetor
FrameChromium-Molybdenum steel central-tube frame

Related product manuals