KTM 125 SX 2024 User Manual

6 CONTROLS
16
6.5 Start button
S05511-11
(SX)
Start button
1
is fitted on the right side of the handlebar.
S05512-11
(XC)
Start button
1
is fitted on the right side of the handlebar.
Possible states
• The start button is in the basic position
• The start button is pressed – In this position, the starter
motor is actuated.
6.6 Combination switch
W00016-10
The combination switch is fitted on the left side of the handlebar.
Possible states
1 Lean – Lean mapping is activated when white indica-
tor lamp
A
lights up. This mapping is recommended
for firm/hard surfaces.
2 Rich – Rich mapping is activated when green indica-
tor lamp
B
lights up. This mapping is recommended
for sandy/loose surfaces.
The engine characteristic can be changed using button
1
and
button
2
on the combination switch.
6.7 Overview of indicator lights (SX)
W00017-10
Possible states
Malfunction indicator lamp lights up/flashes orange
– The OBD has detected a malfunction in the vehicle
electronics.
Indicator lamp
A
lights up white – Lean mapping is
activated. This mapping is recommended for firm/hard
surfaces.
Indicator lamp
B
lights up green – Rich mapping
is activated. This mapping is recommended for
sandy/loose surfaces.

KTM 125 SX 2024 Specifications

General

Displacement	124.8 cm³
Bore x Stroke	54 mm x 54.5 mm
Starter	Electric starter
Transmission	6-speed
Front Suspension	WP XACT-USD, Ø 48 mm
Rear Suspension	WP XACT Monoshock with linkage
Ground Clearance	375 mm
Seat Height	950 mm
Front Tire	80/100-21"
Rear Tire	100/90-19"
Engine Type	Single-cylinder, 2-stroke
Fuel System	Mikuni TMX 38
Front Brake	Disc brake, 260 mm
Rear Brake	Disc brake, 220 mm
Clutch	Wet, multi-disc clutch, Brembo hydraulics
Frame	Central double-cradle type in chrome-molybdenum steel