3 WORK 9
L01484-10
Main work
–
Fold up cover
.
–
Place battery
in the battery compartment.
L01483-11
– Position the positive cable and mount and tighten the screw.
Guideline
Screw, battery terminal M6 4.5 Nm
(3.32 lbf ft)
–
Mount positive terminal cover
.
–
Position negative cable
and mount and tighten the screw.
Guideline
Screw, battery terminal M6 4.5 Nm
(3.32 lbf ft)
L01486-10
–
Position cover
.
Screw heads
engage in recesses
.
–
Mount and tighten screw
.
Finishing work
– Mount the front rider's seat. ( p. 7)
– Mount the passenger seat. ( p. 7)
– Set the time and date.
3.7 Recharging the battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
– Keep batteries out of the reach of children.
– Wear suitable protective clothing and goggles.
– Avoid contact with battery acid and battery gases.
– Keep sparks and open flames away from the battery. Only charge in well-ventilated rooms.
– In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least
15 minutes and contact a physician.
Warning
Environmental hazard The battery contains elements that are harmful to the environment.
– Do not dispose of batteries with the household waste. Dispose of a defective battery in an environmentally friendly manner.
Give the battery to your authorized KTM dealer or dispose of it at a collection point for used batteries.
To Next Page
Loading...
Need help?
General
