KTM 1290 SUPER DUKE R 2023 User Manual

3 WORK
10
Finishing work
(SUPER DUKE R)
–
Mount the passenger seat. ( p. 8)
3.5 Removing the 12-V battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
– Keep 12 V batteries out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
– Avoid contact with battery acid and battery gases.
– Keep sparks or open flames away from the 12 V battery.
– Only charge 12 V batteries in well-ventilated rooms.
– Rinse the affected area immediately with plenty of water in the event of contact with the skin.
– Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and
battery gases get into the eyes.
Caution
Danger of accidents Electronic components and safety devices will be damaged if the 12-V battery is dis-
charged or missing.
If the 12-V battery is discharged or defective, malfunctions in the vehicle electronics can occur, espe-
cially when starting.
– Never operate the vehicle with a discharged 12-V battery or without a 12-V battery.
Preparatory work
(SUPER DUKE R)
– Remove the passenger seat. ( p. 8)
– Remove the front rider's seat. ( p. 8)
S03934-10
Main work
(SUPER DUKE R)
–
Remove control unit
1
and hang to the side.
–
Disconnect negative cable
2
from the 12-V battery.
–
Remove positive terminal cover
3
and disconnect the
positive cable from the 12-V battery.
S03935-10
–
Disconnect plug-in connector
4
.
–
Remove screw
5
and take off the battery cover.
–
Take the 12-V battery
6
out of the battery compartment.

KTM 1290 SUPER DUKE R 2023 Specifications

General

Brand	KTM
Model	1290 SUPER DUKE R 2023
Category	Motorcycle
Language	English