Product
Exploded View
Disassembly & Assembling
Workshop manual
5018 PDS 2003
Werkplaatshandboek
2
Shock absorber 5018 PDS 2003 05/2002
Introduction
General notice
Pay attention to the following notes, when you are working
with WP suspension products as described in this
workshop manual:
Always use clean and professional tools.
Regular you need next to the general equipment, the
special tools of WP Suspension.
These tools with a unique âTâ number (available at
WP Suspension) protect you from damaging the parts.
Always use aluminium protector-plates, when clamping our
products or parts in the vice.
Always replace damaged or worn parts.
Clean all parts before assembling.
Caution:
Many times it is necesarry to assemble parts with T131,
T132 and T163.
These parts must dry for at least four hours!!
To Next Page
Loading...
Need help?
General
