To Next Page

To Previous Page

ENGLISH

Collar screw, front wheel spindle M 24x1,5 40 Nm

Brake caliper, front M 8 Loctite 243 + 25 Nm

Brake disk, front M 6 10.9 Loctite 243 + 15 Nm

Brake disk, rear M 6 Loctite 243 + 15 Nm

Clamping screws, upper fork bridge M 8 20 Nm

Clamping screws, lower fork bridge M 8 15 Nm

Clamping screws, fork stubs M 8 10 Nm

Collar nut, rear wheel spindle M 20x1,5 80 Nm

Hexagon nut, swing arm bolt M 14x1,5 100 Nm

Hexagon collar screw, handlebar clamp M 8 20 Nm

Allan head screw, handlebar support M 10 Loctite 243 + 40 Nm

Shock absorber, top M 12 60 Nm

Shock absorber, bottom M 12 60 Nm

Sprocket screws M 8 Loctite 243 + 35 Nm

Ball joint for push rod M 6 Loctite 243 + 10 Nm

Engine mounting bolt M 10 45 Nm

Engine brace M 8 33 Nm

Screw adjusting ring spring preload shock abs. M6 8 Nm

Spoke nipple M4,5 /M5 5 Nm

Other screws on chassis M 6 10 Nm

M 8 25 Nm

M 10 45 Nm

Other collar nuts on chassis M 6 15 Nm

M 8 30 Nm

M 10 50 Nm

TIGHTENING TORQUES - CHASSIS

Questions and Answers:

Need help?

Do you have a question about the KTM 250 SX 2003 and is the answer not in the manual?

KTM 250 SX 2003 Specifications

General