KTM 250 SX 2003 User Manual

274 pages

To Next Page

To Previous Page

ENGLISH

TIGHTENING TORQUES

Flange bolts - cylinder-head M 8 35 Nm (25 ft.lb)

Nuts-cylinder base M 10 35 Nm (25 ft.lb)

Flywheel collar nut M 12x1 60 Nm (44 ft.lb)

Nut for primary sprocket (LH thread) M 18x1.5 Loctite 243 150 Nm (110 ft.lb)

Nut for inner clutch hub M 18x1.5 Loctite 243 100 Nm (74 ft.lb)

Crankcase and cover bolts M 6 8 Nm (6 ft.lb)

Swingarm pivot M 14 100 Nm (74 ft.lb)

Flat head screw release plate kickstarter M 6x16 Loctite 648 19 Nm (14 ft.lb)

Other screws M 6 10 Nm (7 ft.lb)

M 8 25 Nm (19 ft.lb)

M 10 45 Nm (33 ft.lb)

Questions and Answers:

Need help?

Do you have a question about the KTM 250 SX 2003 and is the answer not in the manual?

General