EasyManuals Logo
Home>KTM>Motorcycle>250 XC-W TPI 2019

KTM 250 XC-W TPI 2019 User Manual

KTM 250 XC-W TPI 2019
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
BRAKE SYSTEM 13
105
Info
Clean up overflowed or spilled brake fluid immediately
with water.
13.9 Checking the free travel of foot brake lever
Warning
Danger of accidentsThe brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear
brake.
Set the free travel on the foot brake lever in accordance with the specification.
402026-10
Disconnect spring
1
.
Move the foot brake lever back and forth between the end stop
and the contact to the foot brake cylinder piston and check
free travel
A
.
Guideline
Free travel at foot brake lever 3 5 mm (0.12 0.2 in)
» If the free travel does not meet specifications:
Adjust the basic position of the foot brake lever.
( p. 105)
Reconnect spring
1
.
13.10 Adjusting the basic position of the foot brake lever
Warning
Danger of accidentsThe brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear
brake.
Set the free travel on the foot brake lever in accordance with the specification.
402026-10
Disconnect spring
1
.

Table of Contents

Other manuals for KTM 250 XC-W TPI 2019

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 250 XC-W TPI 2019 and is the answer not in the manual?

KTM 250 XC-W TPI 2019 Specifications

General IconGeneral
BrandKTM
Model250 XC-W TPI 2019
CategoryMotorcycle
LanguageEnglish

Related product manuals