COMBINATION INSTRUMENT 7
35
Press the but-
ton for 2–3
seconds.
No function
Press the but-
ton for 2–3
seconds.
No function
Briefly press
the button .
No function
7.21 Display mode SPEED/S1 (stop watch 1)
400327-01
– Repeatedly press the button briefly until S1 appears at the
top right of the display.
S1 (Stop watch 1) shows the riding time based on TR1 and contin-
ues running as soon as an impulse arrives from the wheel speed
sensor.
The calculation of this value starts with the first impulse from the
wheel speed sensor and ends 3 seconds after the last impulse.
Press the but-
ton for 2–3
seconds.
Displays of TR1, A1 and S1 are reset to 0,0.
Briefly press
the button .
Next display mode
Press the but-
ton for 2–3
seconds.
No function
Briefly press
the button .
No function
7.22 Display mode SPEED/S2 (stop watch 2)
400328-01
– Repeatedly press the button briefly until S2 appears at the
top right of the display.
S2 (Stop watch 2) is a manual stop watch.
If S2 is running in the background, the display S2 flashes.
Press the but-
ton for 2–3
seconds.
The displays of S2 and A2 are set to 0,0.
Briefly press
the button .
Next display mode
Press the but-
ton for 2–3
seconds.
No function
Briefly press
the button .
Starts or stops S2.
To Next Page
Loading...
Need help?
General
