KTM 250 XC-W TPI 2019 User Manual

12 SERVICE WORK ON THE CHASSIS
78
12.15 Lubricating the steering head bearing
H02387-01
(All standard EXC/XC-W models)
– Remove the lower triple clamp. ( p. 70)
– Install the lower triple clamp. ( p. 71)
(All Six Days models)
– Remove the lower triple clamp. ( p. 70)
– Install the lower triple clamp. ( p. 74)
12.16 Removing front fender
Preparatory work
– Remove the headlight mask with the headlight. ( p. 123)
V00340-10
Main work
–
Remove screws
1
.
V00341-10
–
Remove screws
2
. Take off front fender.
12.17 Installing front fender
V00341-11
Main work
–
Position front fender. Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)

KTM 250 XC-W TPI 2019 Specifications

General

Brand	KTM
Model	250 XC-W TPI 2019
Category	Motorcycle
Language	English