11 SERVICE WORK ON THE CHASSIS 30
11.1 Raising the motorcycle with the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
L01270-10
– Raise the motorcycle at the frame underneath the engine.
The wheels must no longer touch the ground.
– Secure the motorcycle against falling over.
Lift stand (54829055000)
11.2 Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
L01255-10
– Remove the motorcycle from the lift stand.
– Remove the lift stand.
– To park the motorcycle, insert plug-in stand 1 into the left side of the wheel spin-
dle.
Info
Remove the plug-in stand before riding.
11.3 Bleeding the fork legs
Preparatory work
– Raise the motorcycle with the lift stand. ( p. 30)
L01264-10
Main work
– Release bleeder screws 1.
Any excess pressure escapes from the interior of the fork.
– Mount and tighten bleeder screws.
Finishing work
– Remove the motorcycle from the lift stand. ( p. 30)